Average Reviews:
(More customer reviews)My 2 year old bottom freezer refrigerator started to have the classic symptoms, not always cooling, one second clicking sound when not cooling. Some times the refrigerator cooled but not the freezer part. Sometimes neither part cooled while the fridge started to click. (Clicking is from relay noise).
I ordered this universal board for my fridge from Amazon.com. I took advantage of the FREE shipping. It arrived quickly in a timely fashion. It was a sealed GE factory board and not a brand X board. First class! The board came with clear instructions to be used for your particular refrigerator.
In my case, I removed the small rear panel on the back side of the fridge to expose the board. You then unplug the fridge, pull out the connector plugs from the board, remove the ground wire under a screw, remove the board off of 4 plastic standoff spacers, install the new board onto the spacers and then plug in all the wire connectors onto the new board. My new board had many more parts on it then the old board. You cannot plug the wrong connector into a wrong socket. Each connector has a different number of pins on it so any one plug will fit into only one socket.
In some cases a wire needs to be cut on one of the plugs per the instructions, but for my model this was not neccessary. Also, for BOTTOM FREEZER refridgerators, you need to take the lower panel off exposing the compressor and check if you have a start capacitor on your fridge. (The diagram shows you where the start capacitor would be located if you have one). If you have one, you need to cut a ground wire off a plug. In my case no wire needed to be cut as I had no start capacitor on my fridge. In short all I had to do was to swap out boards on the fridge and then put the panels back in place with screws.
For tools I needed a Phillips screw driver, but to remove the old board a pair of needle nose plyers helped removing the old board off the stand off legs as they needed to be squeezed before the board could be lifted off the standoffs one at a time. There are 4 plastic standoff legs holding the board in place. I didn't need to cut any wires but if you did need to cut one or two a small wire cutter would be handy. Otherwise a pocket knife would do the job.
If you follow the clear instructions you won't make a mistake. In my case I could replace the board again now that I did it once in less then 5 minutes. Doing it the first time, so you don't mistake, should take you no more the 15 to 20 minutes being very careful.
One last thing, THE BOARD FIXED THE REFRIGERATOR! (Please understand after reoplacing the board and turning the fridge on again, once plugging it back into the wall, will require hours of operation before the fridge and freezer are cold enough to turn the compressor off. In my case, with an empty fridge, I got tired of waiting to see if it would turn off after three hours of operation watching it. When I checked the next day, it was cold and not running. Everything was working just fine. It took a long time before it shut off even when the fridge was empty. (So be patient).
You can do the repair yourself and save a lot of money! The part from Amazon cost about half the list price of the board, no tax, and I also saved the cost of the repairman's labor. In my case I had actually called a repairman, two weeks later he had the board but never showed up on his appointment. I fired him and did the job myself quicker and for less money.
Lee
Houston,Texas
Click Here to see more reviews about:
GE WR55X10942 Refrigerator Main Control BoardGeneral Electric WR55X10942 Refrigerator Main Control Board is common in GE, RCA, and Hotpoint brands. Installation instructions are included Product Description WR55X10942-Refrigerator-Main-Control-Board.
Get 51% OFF
Click here for more information about GE WR55X10942 Refrigerator Main Control Board
